Automatic Acrylic Channel Letter Hot Bending Machine Thermal PVC Plastic Hot Bender Heater Acrylic Sheet Bending Machine with CE Certified

Product Description

Automatic Plastic Acrylic PVC Sheet Angle Bending Bender Machine with CE Certified 1800mm 2400mm 3000mm

Features:
    This Bending machine is widely used for bending the materials like acrylic, plastic, PC, PVC and PP. The machine bends the materials into different angles by heating up the materials with single or multi tube heaters. This machine is fast and precise. Working plateforms are cooled by water cooling system for the best result, highest efficiency and precise angle forming. The adjustable temperture works out for different materials correctly without over heating causing bubbles and undesirable curves. This is an ideal machine for the acrylic and plastic works.

Main advantages of automatic bending machine:
1. High processing efficiency, mass production, and labor saving.
2. Configure the button operation panel to select the automatic and manual two-state bending, which is simple and practical.
3. New configuration, high-strength molding device, set heating time and temperature, and instant automatic bending is completed.
4. This machine is widely used to meet the bending needs of different angles.

Machine performance characteristics:
1. Digital thermostat , simple, convenient and safe.
2. Manual funtion and automatic function. 
3. Set soften time and angle according to acrylic sheet thickness and melting character, angle will be made automatically.
4. Set and adjust angle by hand, convenient and accurate, make sure uniform workpiece for mass production.
5.Infrared constant temperature heating method, the workpiece is evenly heated, instantly softened and bent, and cooled and formed, high efficiency and long life.
6. Adjust the working voltage according to workpiece sheet thicknes, avoid burn or deficient heating. 
7. Dural cooling system(water cooling and air cooling). The temperature-controller inset will alarm automatically when water temperature is too high so to insure the equipment safety
8. With electricity leakage protectioin function, ground wire connection, make user and machine more safely. 
9. The bending machine helps you to easily and quickly produce different V-shaped profiles.
10. The bending machine allows to universally adjust internal sizes of the V-Shaped profiles up to maximum of 1200mm/1500mm/1800mm/2400mm/3000mm, that allows to avoid time-consuming and cost-intensive adjustment of the bending machine.
11. This machine can fold 2 corners at the same time and fold 180 degrees at the same time. It can be controlled by a single work surface and humanized design.
12.The machine water cooling system is made of 304# stainless steel material to ensure that it is not deformed for a long time.
13. Height adjustable device for bottom heater.
14. Adjustable heating width.

Automatic bending machine installation and operation methods:
1. Before using the machine, read the instructions in detail, and follow the power supply instructions for 380V or 220V. It must be used according to the relevant electrical regulations for reliable grounding.
2. Installation environment: The equipment should be installed on a flat, well-ventilated ground.
3. It is necessary to configure a 2.2KW air compressor or pipeline compressed air. The minimum guarantee is 0.6Mpa and the air pipe interface is 8MM.

Other models with different size and type:  

Specifications:

Product name	Automatic bending machine
Application materials	Acrylic, PVC, PE, PP, PET, HIPS and other plastic materials
Width	1200mm/1500mm /1800mm /2400mm /3000mm
Length	Unlimted
Positioning method	Automatic cylinder + manual adjustment
Processing thickness	Maximum thickness 8mm (We have model with up bottom heating elements, bend max 16mm thickness)
System configuration	Mechanical mode + pneumatic
Temperature adjustment	0-300ºC
Cooling system	Equipped with water circulation cooling and air cooling system
Foldable angle	0-180 degrees, adjustable
Double pipe spacing	150-550mm adjustable
Application range	Used for bending various acrylic advertising signs, lighting and craft products.
Operation mode	Button panel operation + foot control
Voltage	220V, 50Hz

Applications:
Used to bend components of Acrylic, plexiglass, Plastic, PVC, PP, PMMA etc materials, suitable for mass production of advertisement industry.

Customers Working:

Samples Show: