PVC PE PP PET plastic double side 16mm thickness plate automatic edge angle hot bender acrylic plexiglass bending machine FA2400D FA3000D
Features:
This Bending machine is widely used for bending the materials like acrylic, plastic, PC, PVC and PP. The machine bends the materials into different angles by heating up the materials with single or multi tube heaters. This machine is fast and precise. Working plateforms are cooled by water cooling system for the best result, highest efficiency and precise angle forming. The adjustable temperture works out for different materials correctly without over heating causing bubbles and undesirable curves. This is an ideal machine for the acrylic and plastic works.
Main advantages of automatic bending machine:
1. High processing efficiency, mass production, and labor saving.
2. Configure the button operation panel to select the automatic and manual two-state bending, which is simple and practical.
3. New configuration, high-strength molding device, set heating time and temperature, and instant automatic bending is completed.
4. This machine is widely used to meet the bending needs of different angles.
Machine performance characteristics:
1. Digital thermostat , simple, convenient and safe.
2. Manual funtion and automatic function.
3. Set soften time and angle according to acrylic sheet thickness and melting character, angle will be made automatically.
4. Set and adjust angle by hand, convenient and accurate, make sure uniform workpiece for mass production.
5.Infrared constant temperature heating method, the workpiece is evenly heated, instantly softened and bent, and cooled and formed, high efficiency and long life.
6. Adjust the working voltage according to workpiece sheet thicknes, avoid burn or deficient heating.
7. Dural cooling system(water cooling and air cooling). The temperature-controller inset will alarm automatically when water temperature is too high so to insure the equipment safety
8. With electricity leakage protectioin function, ground wire connection, make user and machine more safely.
9. The bending machine helps you to easily and quickly produce different V-shaped profiles.
10. The bending machine allows to universally adjust internal sizes of the V-Shaped profiles up to maximum of 1200mm/1500mm/1800mm/2400mm/3000mm, that allows to avoid time-consuming and cost-intensive adjustment of the bending machine.
11. This machine can fold 2 corners at the same time and fold 180 degrees at the same time. It can be controlled by a single work surface and humanized design.
12.The machine water cooling system is made of 304# stainless steel material to ensure that it is not deformed for a long time.
13. Height adjustable device for bottom heater.
14. Adjustable heating width.
Automatic bending machine installation and operation methods:
1. Before using the machine, read the instructions in detail, and follow the power supply instructions for 380V or 220V. It must be used according to the relevant electrical regulations for reliable grounding.
2. Installation environment: The equipment should be installed on a flat, well-ventilated ground.
3. It is necessary to configure a 2.2KW air compressor or pipeline compressed air. The minimum guarantee is 0.6Mpa and the air pipe interface is 8MM.
Other models with different size and type:
Specifications:
|
Product name |
Automatic bending machine |
|
Application materials |
Acrylic, PVC, PE, PP, PET, HIPS and other plastic materials |
| Width |
1200mm/1500mm /1800mm /2400mm /3000mm |
| Length |
Unlimted |
|
Positioning method |
Automatic cylinder + manual adjustment |
|
Processing thickness |
Maximum thickness16mm |
|
System configuration |
Mechanical mode + pneumatic |
|
Temperature adjustment |
0-300ºC |
|
Cooling system |
Equipped with water circulation cooling and air cooling system |
|
Foldable angle |
0-180 degrees, adjustable |
|
Double pipe spacing |
150-550mm adjustable |
|
Application range |
Used for bending various acrylic advertising signs, lighting and craft products. |
|
Operation mode |
Button panel operation + foot control |
| Voltage |
220V, 50Hz |
Applications:
Used to bend components of Acrylic, plexiglass, Plastic, PVC, PP, PMMA etc materials, suitable for mass production of advertisement industry.
Customers Working:
Samples Show:
Audited Supplier 
){kind=link}
){kind=link}