CO2 Laser engraving Cutting Machine with Double Heads FLC1610D
Features:
FLC1610D double-head laser cutting machine has the high-efficiency and low-cost laser cutting equipment which was researched and manufactured by our company according to the features of large processing working loads and urgent processing working time in manufacture enterprise. The working feature of this machine is that the laser head can realize engraving and cutting at the same time each of which can be controlled respectively.
The multi-head laser cutting machine has the features of large area processing with single head and high efficiency cutting of small area with two laser heads, making the flexibility arisen and the suitable area more abroad. It can solve the problem of mass production, which cannot be achieved by single laser head and make volume production by laser machine possible.
Extra Features:
1) Materials can extend through the front and rear doors to allow for a larger work product.
2) Work light to help see products during laser processing.
3) Red-Dot pointer to help you see the expected laser beam position.
4) AutoFocus touch sensor to easily set the right height for best engraving and cutting.
5) Parts tray for removing small parts or scrap from under the workbed.
6) Fully enclosed laser case yields a class I (user friendly) laser product.
Specifications:
| Model |
FLC1610D |
| Laser-type |
10.6um CO2 glass laser tube w/ water-cooling |
| Laser power |
100W*2 or 130W*2 |
| Working area |
1600*1000mm |
| Max Engraving speed: |
0-60, 000mm/min |
| Max cutting speed |
0-36, 000mm/min |
| Laser output control |
1-100% software setting |
| Location precision |
Less than 0.01mm |
| Highest scanning precision |
2500DPI |
| Operating temperature |
0 - 45 |
| Operating humidity |
5- 95% non-condensing |
| Minimum shaping character |
English 1.0 x 1.0mm |
| Graphic format supported |
HPGL, BMP, PLT, DST, DXF, and AI ... |
| Driving system |
Stepper(Optional: Servo) |
| Cooling mode |
Water-cooling and protection system |
| Auxiliary equipments |
Exhaust-fans, air-exhaust pipe, air pump, water pump |
| Controller |
DSP |
| Compatible Software |
CorelDraw, AutoCAD, Photoshop, TAJIMA |
| Slope Engraving |
Can be easily designed within the "Grade Engrave" function. |
| Color separation |
Uses color property to set function, speed, and laser power |
Samples Shown:
Some other models:
Audited Supplier 
){kind=link}
){kind=link}